Thursday, August 19, 2010

Week05 Sarah Modoh: 2D_Design ~ 17.08.2010

2d Design Sarah Modoh

GROUP EXERCISE – Part 1: Challenge assumptions
Q1. Relatives - A doctor in London had a brother in Manchester, who was a lawyer – but the lawyer in Manchester did not have a brother in London who was a doctor. Why?
Assumption: we were assuming that the doctor was a man, because they said that he had a brother.
Answer: The doctor is a woman.

R001 - This is a lady doctor, get it, from question 1.

Q2. Bottled Money - If you put a small coin piece in an empty bottle and replaced the
cork, how would you get the coin out of the bottle without taking out the cork or breaking the bottle?
Assumption: When we read “take the cork out” we assume we can only take the cork out instead of pushing it in.
Answer: Push the cork in.

R002 - Someone teaching you how to open up a wine bottle, just incase you have any problems

Q3. The Restaurant Meal - Three women each have two daughters, and they all go into a
restaurant for a meal. There are only seven vacant seats in the restaurant, but each has a seat for herself. How do they manage it?
Assumption: We assume that there are all 9 women there.
Answer: There’s a grandma who has two daughters, and those two daughters have two daughters themselves.

GROUP EXERCISE – Part 2: Challenge assumptions
1. What would be on your list of assumptions - if you were Mike?
a) Assuming mike needs transport to Hollywood.
b) Assuming he needs to get there in a certain amount of time.
c) Assuming that he’s going to take a nap and get stuck in morning traffic.
2. Challenge each item in the list and find a solution to Mike’s problem
a) Assuming mike needs transport to Hollywood: He could find different types of transport; Bike (take too long, and too tiring), Motorbike, Taxi (too expensive), Plane (too expensive, and L.A isn’t that far from Hollywood).
b) Assuming he needs to get there in a certain amount of time: Mike does have to get there in a certain amount of time, so he could plan out his 7 hours carefully so he gets everything done, as in sleep, getting to Hollywood in time etc.
c) Assuming that he’s going to take a nap and get stuck in morning traffic: What if he doesn’t take a nap so he doesn’t get stuck in traffic.

R003 - Classic thinking pose. This is what i was doing for Part 2.

Answer: Mike shouldn’t take a nap so he doesn’t get stuck in morning traffic. If he goes earlier then he’ll be able to get ready and have enough sleep so he can make it in time to his audition. R004 - two images on the left of my visual diary, this is the work of the practical we did about our artwork that's going to be in the exhibition.

Monday, August 9, 2010

Week04 Sarah Modoh: 3D_Design ~ 10.08.2010

3D design Sarah Modoh


R001 - scientist holding two test tubes (the practical involves us exploring two experiments hence the scientists)

Two experiments

experiment 1: Cut & paste
with this process of creating the pyramid I was thinking that I could just create a really jagged edged pyramid, so instead of having a whole lot of different boxes I could just cut and paste pictures that. The end product would look like a whole lot of TV’s piled upon each other, but that’s the illusion. The truth is that its just one object instead of a bunch of tiny objects.
Pros & cons
Pros:
- easy to transport because its just one object.
- easy to smash and tear apart

Cons:
- It’d be really big
- To make the pyramid with the right corners so that the prints would stick on nicely
- Printing out the pictures, I’d have to ad light and shadow in them to create depth
- its just be too hard, because its one object.


R002 - This video is referenced to experiment 2 because this guy in his video does alot of cutting and pasting.

Experiment 2: Cut & create
Here I’d actually make each individual box, and stick on the pictures or have to templates ready. Then by having to different groups of made boxes. One group of boxes where they look good, these boxes will sit on the outside of the pyramid so everyone can see it. And the other group of boxes will be buried inside of the pyramid so it builds the shape of the pyramid so I don’t have to worry about the looks of these boxes.
Pros & cons
Pros:
- it’d be more creative
- look more stylish and unique
- the pyramid would sit better
- more freedom to add cooler pictures in it
- it wouldn’t be as hard as experiment 1 with the angles and corners.
Cons:
- need more materials
- need more time
- need more templates
- need to do a lot of trial and error
Choosing & refusing
I’d choose experiment 2 because it seems more appropriate and I’d like to customizes each TV box.


Group Work

Zac – Apple

R003 - Zac's Apple (jokes this isn't his apple)

Making a 3D Object out of paper
Sarah – TV Boxes
Making the pyramid out of TV shaped boxes
Jess – 4 elements
The 3D elements that are apart of the 2D design is jewelry. In the 2D posters there will be characters wearing jewelry. There are 4 posters and one piece of jewelry per poster. The posters will be based on the four elements of the changing seasons. For example there will a girl wearing a necklace made of fire, and that necklace will be based on the element.
Stevie – Small Life
3D sculpture of animals and nature.

Design Exploration

Zac - techniques others have used on youtube.
Sarah – exploring the internet to see if this idea has been done before
Jess – looking for different ideas from other artist
Stevie – finding pictures and ideas on nature.

Design Challenges

Zac – doing the poster in photoshop or illustrator
Sarah - different types of cardboards, and glues to keep the pyramid together.
Jess - The use of different materials and time consumption.
Stevie – different materials and ways of putting it all together


R003 - Image from my visual diary of the Practical we did for experiments.

Week04 Sarah Modoh: 2D_Design ~ 10.08.2010

2D Design - Sarah Modoh
R001 - Walking through the Guggenheim museum.


week 04 - 2D design
This week for 2D design the groups had to get together and pick three of the best design for the exhibition. But not many people did the designs so then we just picked one of our best works and discussed about the exploration and challenges of the design and art work.

Group Exercise
Experimenting, Exploring and Challenging
Design Exploration
Sarah - TV Pictures
The pictures that are going to be displayed on each TV screen in the 3D TV pyramid.
Zac – Fantasy posters
Photos of people edited in photoshop – modern clothing with medieval psychic powers
Jess – World changes
2D presentation of three separate pictures on how the world has changed in a fantasy prospective.
Stevie – Nature Danger
Edited photographs of animals left homeless by humans
Design Challenging
Sarah - making her own pictures instead of using someone else's
Zac - Make it stand out
Jess - Materials used
Stevie - Getting the photos of the animals

PRACTICAL = 2D, experiments:
2 experiments
Pros &  Cons
Choosing &  Refusing 

Design Explorations & Design Challenges

Experiment 1: Template

Game cover. I will make a template and a net of a game cover on the computer. Figure out the measurements. Print the design out on the template of the net, then glue it to the appropriate materials for it to be durable and stable once its assembled.

Pros:
- Being creative & skilled
- Using 2D and 3D skills together
- Appropriate for exhibition art work
- modern marketing strategy, good artwork for portfolio.

Cons:
-Time consuming
- must get measurements correct or will fail making the net and template
- finding appropriate material for experiment
- getting messy  whilst assembling the net


Experiment 2: Drawing
Television 3D Sculpture/ pyramid. By making three different sized nets to represent the Televisions, using the largest sized TV (Television) net as the base of the pyramid, I can make the net on the computer then just changing the measurements larger or smaller to create the different sized nets. By having these nets and templates set up its just the matter of printing and designing in bulk.

Pros:
- Unique sculture, centre of attention
- many designs, more stories to tell in my artwork
- fun sized
- Using 2D and 3D skills together

Cons:
- more time consuming
- more decission making
- expensive project
- very artsy, not so mainstream media.

Choosing & Refusing: 
Realistically, in knowing myself very well, the second experiment is more of a fantasy than the first. It's size sound time consuming and very experimental. Whereas experiment 1 sounds more realistic as well as creatively exciting where as it I think idealistically it can lead to a well executed project and if done correct lead to many other projects in the marketing area. Either way they both have many trial and errors when it comes to the 3D side of things. The little details will matter the most.


R002 - 2D design Practical (Visual Diary)

R003 - 2D design practical part 2 (Visual Diary)

Week03 Sarah Modoh: 3D_Design ~ 03.08.2010

3D Design - Sarah Modoh

Even though i wasn't in class because i was sick I've managed to catch up on work. For 3D design class we were to create 3 different economical cars that were based on the book "The laws of Simplicity" rule/law REDUCE. We were to go into groups and brainstorm. (I've probably done some of the activities wrong because i wasn't in class to experience the group work, so don't get mad!!)

R001 - Small economical cars "electric cars"



all the brainstorming i did was;

-wind powered
-solar powered
-CO2 powered
-salt watered powered
reduce
-no airocn
-places that are colder than darwin.

then i came up with some ideas and sketches of the cars.

The three car names and motos that i came up with:


Nut i = "because its crazy as its inventor"
C Nut = "it makes you see"
Wee Nut = "as tiny as wee"

The brand name is "POLO DEUCE" and the moto "A Nut-E invention"

These are the descriptions of the cars:

"Wee Nut"
The Wee Nut isn't wee small for nothing, it's the smallest car you'll ever see. With only 4 different wheels. You stand upwards to drive!
Function: more space ont he roads
Materials: metal, so you dont die so easily
Style: Unique upwards, and bright neon colours so you stand out.









"C Nut"
The solar paneled powered car similar to the Nut i just slighly bigger. The C Nut makes you see how economical it is.
Function: No boot, 2 doors, 1 big window, 2 solar panels.
Materials: solar panels, plastic
Style: sedan.

"Nut i"
The Nut i is just as nutty as it's inventor. This wind powered nut shaped car, and its aerodynamic fundamentals will carry you and your friend anywhere you want.
Function: made for 2, no boot, 3 wheels, sleek and small yet spacious
Materials: metal
Style: its own











R002 - (Images left & right) These are photos of the cars from my visual diary



Week03 Sarah Modoh: 2D_Design ~ 03.08.2010

2D Design - Sarah Modoh
http://www.anikaos.com/0003-panda/kaos-panda08.gif
Although i wasn't here for the class because i was sick, doesn't mean i cant do some work.
From looking over the work that was done in the handouts files this is what I've come up with so far, so don't expect much because i might not get it.

WEEK 03! 2D DESIGN:
So the group work i couldn't do because i wasn't in a group. And i'm talking about the word combination exercise. But the two words that i thought of were
"Book, worm" and "bird, man". These are the two pictures that i thought of when i thought of these words. I probably did the exercise wrong any ways....



For the practical i didn't know that we had to think of 3 different ideas for the exhibition but coincidentally at work i thought of 3 different ideas for the exhibition. I dont want to tell much because that'd be a spoiler and i think they're pretty cool ideas.

For my first idea im going to have:
A pyramid of cardboard boxes that are int he shape and look like really old looking televisions. The TV's are going to have different random pictures on them and is just going to be a bunch of pictures that steel your attention because thats what i think a TV is, a bunch of pictures that distract you. The name of this piece is going to be called something like " So much TV but nothing to watch"

My second idea is going to be a Big life sized barbie. Although its not going to be an actual barbie, this idea was inspired by a barbie and a conversation that a friend and i had, which was about looking good and keeping hot. I wish to have the box the size of 1.5m in height and im going to use my photography and photoshop skills to create a person that looks "perfect". I call this "perfection, buy it in a box."

R001 - Life size barbie "watch how everyone loves the life size barbies act, this is how i want the crowd to be like when they see my art work"


and for my third idea im going to make a shoe ad/pamphlet that advertises shoes, and that's all I've thought of so far.



















R002 - This is a model who is inspiring for my life size model barbie artwork.
R003 - Image from my visual diary. These are the designs for the cars.

Sunday, August 8, 2010

Week02 Sarah Modoh: 2D_Design ~ 27.07.2010

2D Design - Sarah Modoh

This week for 2D design we had to come up with tags. The purpose of the tags were for our visual diaries to put on each page so it was visible that our visual diaries were up to standards.

First the class brain stormed what materials were going to be used to create the tages eg; soccors, cltoh, glue, leaves, stickers, photoshop etc..

we had to think about what shape, stle and media


Shape: square speech bubble.
Style: contemporary, basic, two stroke outline, cartoonish, clean, simple.
Media: hand drawn rough sketch of ideas then, Illustrator through iMac.


R001 - This is my first tag design of a speech bubble.

we were going to use of the design of the tag. For the Shape of my 2 designs were a pencil and a speach bubble, the style is a clean, simple and clear image.

I first thought of what was going to be written on the tags such as; name, student number, week, date and topid. Then I drew soem ideas down and these are the two tags that i came up with.



These are some links for 2D design that were disscussed in class:
www.ted.com
2Dartistmag.com
Tate - famous gallery in London
Jackson Pollick - Artist

R002 - (Image on the top right) - This is my second tag design of pencils

For the image R002 This is the shape, style and media.
Shape: 2D pencil
Style: basic, clean, simple, lead pencil, black & white, coloured.
Media: hand drawn rough sketch of ideas then, Illustrator through iMac.


R003 - (Image above) This is Jackson Pollick a famous artist.

R004 - This is a video about a designer using "Rhino" program for Cad Graphics, and he's creating a wheel. I just wanted to show you this because he uses a 2D image at the start then from using that image create a 3D image of the wheel.